View XPEHEW-01-0000-00EC2_2882601.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product family data sheet copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. cld-ds34 rev 0 cree ? xlamp ? xp-e high-effciency white leds product description xlamp xp-e high-effciency white leds upgrade the xlamp xp-e to leading performance levels for dif - fuse lighting applications. xp-e hew is designed to enable faster adop - tion of led light in cost-sensitive, consumer lighting products. com - pared to the standard xlamp xp-e, xp-e hew can reduce led count by 50% and still deliver the same sys - tem performance. cree xlamp leds bring high per - formance and quality of light to a wide range of lighting applica - tions, including color-changing, portable and personal, outdoor, indoor-directional, transportation, stage and studio, commercial and emergency-vehicle lighting. features ? light output and effcacy similar to xlamp xp-g ? maximum drive current: 1000 ma ? low thermal resistance: 6c/w ? maximum junction tempera - ture: 150c ? wide viewing angle: 120 ? refow solderable - jedec j- std-020c compatible ? electrically neutral thermal path table of contents www. cree.com/xlamp cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 flux characteristics (t j = 25c) - white .................. 2 characteristics ......................... 3 relative spectral power distribution .............................. 3 relative flux vs. junction temperature (i f = 350 ma) ........ 4 electrical characteristics (t j = 25c) .............................. 5 thermal design ........................ 5 relative flux vs. current (t j = 25c) .............................. 6 typical spatial distribution ......... 6 refow soldering characteristics . 7 notes ...................................... 8 mechanical dimensions (t a = 25c) ............................. 9 tape and reel ........................ 10 packaging .............................. 11
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 2 xlamp xp-e high-efficiency white leds flux characteristics (t j = 25c) - white the following table provides several base order codes for xlamp xp-e hew leds. it is important to note that the base order codes listed here are a subset of the total available order codes for the product family. for more order codes, as well as a complete description of the order-code nomenclature, please consult the xlamp xp family binning and label - ing document. color cct range base order codes min luminous flux @ 350 ma (lm) order code min. max. group flux (lm) cool white 5,000 k 8,300 k r3 122 xpehew-l1-0000-00f51 r4 130 xpehew-l1-0000-00g51 outdoor white 2,600 k 5,300 k r2 114 XPEHEW-01-0000-00EC2 r3 122 xpehew-01-0000-00fc2 neutral white 3,700 k 5,000 k q5 107 xpehew-l1-0000-00de4 r2 114 xpehew-l1-0000-00ee4 80-cri white 2,600 k 4,300 k q3 93.9 xpehew-h1-0000-00be7 q4 100 xpehew-h1-0000-00ce7 warm white 2,600 k 3,700 k q3 93.9 xpehew-l1-0000-00be7 q4 100 xpehew-l1-0000-00ce7 85-cri white 2,600 k 3,200 k p4 80.6 xpehew-p1-0000-009e7 q2 87.4 xpehew-p1-0000-00ae7 90-cri white 2,600 k 3,200 k p4 80.6 xpehew-u1-0000-009e7 notes: ? cree maintains a tolerance of 7% on fux and power measurements and 2 on cri measurements. ? typical cri for cool white (5,000 k - 8,300 k cct) is 68. ? typical cri for neutral white (3,700 k - 5,000 k cct) is 75. ? typical cri for outdoor white (2,600 k - 5,300 k cct) is 70. ? typical cri for warm white (2,600 k - 3,700 k cct) is 80. ? minimum cri for 80-cri white is 80. ? minimum cri for 85-cri white is 85. ? minimum cri for 90-cri white is 90. 2
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 3 xlamp xp-e high-efficiency white leds characteristics characteristics unit minimum typical maximum thermal resistance, junction to solder point - white c/w 6 viewing angle (fwhm) - white degrees 120 temperature coeffcient of voltage - white mv/c -3 esd classifcation (hbm per mil-std-883d) class 2 dc forward current - white ma 1000 reverse voltage v 5 forward voltage (@ 350 ma) - white v 3.0 3.5 forward voltage (@ 700 ma) - white v 3.15 forward voltage (@ 1000 ma) - white v 3.25 led junction temperature c 150 relative spectral power distribution 3 relative spectral power 0 20 40 60 80 100 400 450 500 550 600 650 700 750 relative radiant power (%) wavelength (nm) cool white neutral white warm & 80 cri white
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 4 xlamp xp-e high-efficiency white leds relative spectral power distribution (continued) relative flux vs. junction temperature (i f = 350 ma) 4 0 20 40 60 80 100 400 450 500 550 600 650 700 750 relative radiant power (%) wavelength (nm) outdoor white 85 & 90 cri white 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 25 50 75 100 125 150 relative luminous flux junction temperature (oc)
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 5 xlamp xp-e high-efficiency white leds electrical characteristics (t j = 25c) thermal design the maximum forward current is determined by the thermal resistance between the led junction and ambient. it is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. 5 electrical characteristics (tj = 25oc) 0 100 200 300 400 500 600 700 800 900 1000 2.00 2.25 2.50 2.75 3.00 3.25 3.50 forward current (ma) forward voltage (v) 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 maximum current (ma) ambient temperature (oc) rj - a = 10 c/w rj - a = 15 c/w rj - a = 20 c/w rj - a = 25 c/w
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 6 xlamp xp-e high-efficiency white leds relative flux vs. current (t j = 25c) typical spatial distribution 6 typical spatial radiation pattern 0% 50% 100% 150% 200% 250% 0 100 200 300 400 500 600 700 800 900 1000 relative luminous flux (%) forward current (ma) 0 20 40 60 80 100 120 - 100 - 80 - 60 - 40 - 20 0 20 40 60 80 100 relative luminous intensity (%) angle (o)
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 7 xlamp xp-e high-efficiency white leds 7 reflow soldering characteristics in testing, cree has found xlamp xp-e leds to be compatible with jedec j-std-020c, using the parameters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of solder paste used. note that this general guideline may not apply to all pcb designs and confgurations of refow soldering equipment. profle feature lead-based solder lead-free solder average ramp-up rate (ts max to tp) 3c/second max. 3c/second max. preheat: temperature min (ts min ) 100c 150c preheat: temperature max (ts max ) 150c 200c preheat: time (ts min to ts max ) 60-120 seconds 60-180 seconds time maintained above: temperature (t l ) 183c 217c time maintained above: time (t l ) 60-150 seconds 60-150 seconds peak/classifcation temperature (tp) 215c 260c time within 5c of actual peak temperature (tp) 10-30 seconds 20-40 seconds ramp-down rate 6c/second max. 6c/second max time 25c to peak temperature 6 minutes max. 8 minutes max. note: all temperatures refer to topside of the package, measured on the package body surface.
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 8 xlamp xp-e high-efficiency white leds 8 notes lumen maintenance projections cree currently recommends a maximum drive current of 700 ma for xlamp xp-e high effciency white in designs seek - ing the energy star* 35,000 hour lifetime rating ( 94.1% luminous fux @ 6000 hours) or 1000 ma driver current in designs seeking the energy star* 25,000 hour lifetime rating ( 91.8% luminous fux @ 6000 hours). please read the xlamp long-term lumen maintenance application note for more details on crees lumen maintenance testing and forecasting. please read the xlamp thermal management application note for details on how thermal design, ambient temperature, and drive current affect the led junction temperature. * these lifetime ratings are based on the current energy star solid state lighting luminaires v1.1 (december 12, 2008) and energy star integral led lamps v1.0 (december 3, 2009) lumen maintenance criteria. moisture sensitivity in testing, cree has found xlamp xp-e leds to have unlimited foor life in conditions 30oc / 85% relative humidity (rh). moisture testing included a 168 hour soak at 85oc / 85% rh followed by 3 refow cycles, with visual and electrical inspections at each stage. rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or other - wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu directive 2002/95/ ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim warning: do not look at exposed lamp in operation. eye injury can result. see led eye safety at http://www.cree. com/products/pdf/xlamp_eyesafety.pdf.
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 9 xlamp xp-e high-efficiency white leds 9 mechanical dimensions (t a = 25c) all measurements are .13 mm unless otherwise indicated. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 .98 .98 1.30 .65 .50 2.30 3.30 1.15 3.450 3.450 1.725 +/-.100 1.725 +/-.100 2.5 2.08 .83 .650 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 1 / 1 24.000 a 2610-00014 outline drawing xp hew -- -- -- -- -- -- 11/29/10 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 .98 .98 1.30 .65 .50 2.30 3.30 1.15 3.450 3.450 1.725 +/-.100 1.725 +/-.100 2.5 2.08 .83 .650 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 1 / 1 24.000 a 2610-00014 outline drawing xp hew -- -- -- -- -- -- 11/29/10 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1.30 .65 .50 2.30 3.30 1.15 3.450 3.450 2.36 .83 .650 r 1.530 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 1 / 1 24.000 b 2610-00015 outline drawing xp hew -- -- -- -- -- -- 3/8/11 d. cronin revisons rev description by date app'd b removed chip dimensions dc 5/11/11 recommended pcb solder pad recommended stencil pattern (hatched area is opening)
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 10 xlamp xp-e high-efficiency white leds 10 tape and reel all dimensions in mm. loaded pockets (1,000 lamps) leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) start end cathode side anode side (denoted by + and circle) 160.0 a a b 2.5 .1 section a-a scale 2 : 1 1.5 .1 8.0 .1 4.0 .1 1.75 .10 12.0 .0 + .3 detail b scale 2 : 1 13 mm 7" cover tape pocket tape user feed direction user feed direction
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 11 xlamp xp-e high-efficiency white leds 11 packaging all dimensions in mm. cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # desiccant (inside bag) humidity indicator (inside bag) label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag dessicant (inside bag) humidi t y indicator card (inside bag) p atent label label with customer order code, q t y , r eel i d , po # label with customer order code, qty, reel id, po# label with cree bin code, qty, lot # cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag p atent label label with customer order code, q t y , r eel i d , po #

▲Up To Search▲

Price & Availability of XPEHEW-01-0000-00EC2

	To Download XPEHEW-01-0000-00EC2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .